Date Mode; Stopwatch Mode - TAG Heuer PROCKET PRO HL400-J JUMPING User Manual

2.3. Date Mode

This mode allows you to update the date of the Pocket Pro.
To set the date:
- Press the MEMORY
- Press the SPLIT/LAP
- Press the MEMORY
Validate your setting with the

2.4. STOPWATCH mode

This timing mode allows the timekeeper to make a Start/Finish, with intermediate time
(SPLIT) and lap time (LAP) with a 1/100th of a second precision
The time displayed is up to 59'59.99'' (1 hour)
SPLIT : Intermediate time, or cumulated time taken at each time
button)
The SPLIT Time is to the top of the LCD (mm:ss.dc)
LAP : Lap time or time difference between time taken
The LAP time display is in the middle of the LCD (mm: ss.dc)
Running Time :
The running time always starts from 00:00:00.
- To start, press the
- Three times are running and displayed
- At Split / Lap, press
The SPLIT and LAP
TAGHeuer Timing
button: the first digit will flash and
button to change the value
button to move to the next digit
MODE button
Running time between Start and Finish
The running time is on the bottom of the LCD (mm:ss.dc)
START/STOP button (
SPLIT/LAP Button.
time is stopped. The running time (bottom) continues to run.
SET
(SET icon is OFF)
1. Icon Set ON = Setting
2. Date setting (in red, digit blinking)
(25.03)
3. Year setting (2013)
4. Time of the Pocket Pro (setting in
menu TIME)
1. Number of split / Memory status
2. Running status
3. Split time
4. Lap Time
5. Running time
(SPLIT/LAP
icon is ON)
icon is ON
(SPLIT/LAP
button)
Page 7 / 20