Table of Contents
Advertisement
4.
Recommendations
Although the Pocket Pro can be used indoors and outdoors, optimal viewing and
protection is best when the display is in the shade or covered from direct sunlight and rain.
Never immerse the Pocket Pro in water.
The Pocket Pro is developed to endure light rain.
The USB socket is protected by the black rubber, and prevents any water ingress.
It is very important and recommended to keep the rubber in place at all times when not
using the USB connection.
The optimal visibility of LCD is when the Pocket Pro is protected from direct sunlight
The Pocket Pro can overheat in excessive direct sunlight.
The LCD Plexiglas is fragile. It is not recommended to clean it with a solvent or alcohol
IMPORTANT
A slightly damp cloth is recommended for cleaning the Pocket Pro
5.
Download a new version of Firmware
Program downloads and new releases of the TAG Heuer firmware "up loader" are
available free of charge on our website www.tagheuer-timing.com.
For this operation, you need to have:
•
Mini-USB cable HL545-3
•
The software «TAGHeuerFirmmanager.exe » version minimum V10.0
Procedure
•
Copy the software «TAGHeuerFirmManager.exe » onto your hard disk drive
•
Connect the Mini-USB cable (HL545-3) to the PC and to the Pocket Pro
•
Run the software « TAGHeuerFirmManager.exe »
•
Select the COM Port
•
Select the file: Update (HL400_xxx.dat)
•
Press START on the software.
•
Press reset on Pocket Pro
•
As soon as the upgrade is downloaded into the HL400, validate the software with OK.
•
The HL400 is ready to use.
TAGHeuer Timing
Page 17 / 20
Hide quick links:
Advertisement
Table of Contents
