Quick Guide - TAG Heuer PROCKET PRO HL400-J JUMPING User Manual

7.

Quick Guide

Reset memory
Buttons: Start/Stop + Memory
Change mode:
Clear Memory (Start/Stop + Memory)
Button: Mode
Power off
Buttons: Memory + Mode (hold down together for 5 seconds)
Recall recorded times
Button: Memory
Setting (Date / Time / CD)
Button: Memory to select the digit
Button: Split/Lap to change value
Button: Mode to validate the selection
Stopwatch
Button: Start/Stop: start or stop counter
Button: Split/Lap: memorize Split/Lap
Button: Mode: select display Split or LAP or both
Button: Memory: recall split/lap memorized
Count Down
Button: Start/Stop: Start or Stop counter
Button: Split/Lap: reset the preselected Count Down
Button: Memory: countdown setting
Button: Mode: Select single Count Down or Multi Count Down (CD
blinking)
Time
Button: Start/Stop + Split/Lap: Set Time-of-Day (+ 1 minutes)
Button: Start/Stop: Synchro + Start
Button: Split/Lap: Memorize Time-of-Day
Button: Memory: recall/view memorized time
Jumping A / B / C
Button: Start/Stop: Start, Next Phase, Stop, Restart after Pause
Button: Split/Lap (during run): Pause
Button: Split/Lap (after stop): Next competitor
Button: Split/Lap (5 sec): Disqualify
Button: Mode: change beep signal on the Count Down
Button: Memory: recall / view memorized time
TAGHeuer Timing
Page 19 / 20