Position 0: Screw-in crown (Depending on model)
If your chronograph is equipped with a screw-in crown, please make
sure that the crown is correctly screwed in order to garantee water-
resistance to 200 meters. Unscrew the crown to place in position 1.
Positon 1: Normal position and manual winding
This position allows you to wind your watch manually by rapidly
rotating the crown. Pull the crown out once more to place in position 2.
Position 2: Rapid date correction
Turn the crown anti-clock wise to correct the date. Pull the crown out
once more to place in position 3.
Position 3: Time correction
Turn the crown forwards to backwards according to the desired
correction.
Please remember to always push the crown back to position 1
and to screw in to position 0 if your watch has a screw-in
crown.
TO SET THE TIME AND DATE
A
B
Screw-in crown:
Kirium - 6000 - Link
A
B
Push-in crown:
Carrera - Monaco -
Monza