Specific Timing Modes; Jumping A (Mode A) / Jumping B (Mode B) / Jumping C (Mode C); Start Race; Pause / Restart - TAG Heuer PROCKET PRO HL400-J JUMPING User Manual

3.

Specific Timing Modes

In Pocket Pro Jumping, 3 timing modes are available on the Pocket Pro.
A: Jumping - Table A (Speed):
With Count-Down and Phase 1
B: Jumping - 2 Phase:
With Count-Down, Phase 1 and Phase 2.
C: Jumping - 2 Rounds:
With Count-Down, Round 1 and Round 2

3.1. Jumping A (mode A) / Jumping B (mode B) / Jumping C (mode C)

Each competitor is identified by its passing number (sequential) and not by its bib
number.
The Count-Down value has to be set previously into the CD mode
(in Minutes/Seconds).
In Jumping mode, it is automatically corrected in seconds (example : 1'15'' = 75 sec)
Once the first competitor is started, it is possible to change the count-down beep signal
by pressing the
When it is flashing, as with the Count-Down mode, the last 5 beeps will sound.

3.1.1. Start Race :

For each of the following steps (Count Down, Start / Jump-off / Finish) of Phase or
Round, press

3.1.2. Pause / Restart :

At any time it is possible to Pause the Count-Down or Time by pressing
button.
The icon is flashing.
To restart, press
TAGHeuer Timing
MODE button. The A, B or C icon will be flashing.
START/STOP button (
START/STOP button
1. Number of split / Memory status
2. Running status
3. Chrono Phase 1 (in A) / Phase 2 (in B/C)
4. Chrono Phase 1 (in B/C)
5. Count Down
icon displays)
SPLIT/LAP
Page 12 / 20