TP-Link TL-MR3020 Quick Installation Manual

Quick Installation Guide

Portable 3G/4G Wireless N Router
TL-MR3020
MODEL NO.
2

Hardware Connection

3G/4G Router Mode (Default)
In this mode, the TL-MR3020 is connected to a 3G/4G USB
modem and wirelessly share the 3G/4G mobile connection to
multiple users.
1. TL-MR3020 can be powered by Power Adapter or laptop/PC through the USB cable.
NOTE:
2. TL-MR3020 will restart automatically after you turn the Mode Switch.
3

Connect to Network

Here we take Wireless Network Connection as example, please make sure your device is wirelessly enabled.
For Windows XP
1
Click the icon at the bottom of your desktop.
2
Click Refresh network list, and then select the
wireless network name (SSID) of TL-MR3020. Click
Connect.
NOTE: 1. The default SSID of the network is TP-LINK_POCKET_3020_xxxxxx. (The xxxxxx is the last six characters of the Router's MAC address.)
2. The pre-encryption of TL-MR3020 is written on the product label, please refer to it when you connect to the wireless network.
4
Router Con gurations
1
Open a web browser, type 192.168.0.254 in the address field, and press Enter. At the prompt, enter the
default User Name and Password: admin. Click OK to enter the Router's Web-management page.
2
After a successful login, please configure the Router according to the working mode you choose.
NOTE: For your convenience, TL-MR3020 will keep the following two items when you switch the working mode:
1. WAN information (Internet information), such as the User name and Password of 3G/4G ISP and PPPoE, the Dynamic IP address setting, etc.
2. Wireless settings, such as wireless network name (SSID), Key Type and Password.

Package Contents

Portable 3G/4G Wireless N Router
TL-MR3020
TL-MR3020 QIG
Power Adapter
USB Cable Ethernet Cable
WISP Client Router Mode
In this mode, the TL-MR3020 is wirelessly connected to the
WISP (Wireless Internet Service Provider) and share the Internet
with multiple users.
For Windows 7
1
Click the icon at the bottom of your desktop.
2 Click refresh button
Connect.
1

Physical Description

3G/4G USB Port
Mini USB Port
RJ45 Ethernet Port
Mode Switch
Power
Internet
150Mbps TL-MR3020
WLAN
RJ45 Ethernet
WPS/RESET
and then select the target network. Click
3G/4G USB Port This port is used to plug a 3G/4G modem/card into.
Mini USB Port This port is used to connect the provided power adapter.
This port can be LAN or WAN port depending on the
RJ45 Ethernet Port
working mode.
This button is used to switch the working mode
Mode Switch
of the Router.
To use WPS function, please push the button for
less than 5 seconds, and then the WPS LED will flash;
WPS/RESET
to reset the Router, please push the button for at
least 10 seconds.
Solid The Router is on.
Power
The Router is off.
Off
The Router is connected to the Internet,
Solid
but there is no data being transferred.
Internet
Flashing The Router is transferring data.
Off The Router is not connected to the Internet.
Solid Wi-Fi is enabled.
WLAN
Flashing There is data being transferred through Wi-Fi.
Off Wi-Fi is disabled.
The Ethernet port is connected, but there is
Solid
no data being transferred.
RJ45 Ethernet
Flashing The Ethernet port is transferring data.
Off The Ethernet port is not connected.
Standard AP Mode
In this mode, the TL-MR3020 is connected to a wired network
and transforms the wired Internet access into wireless so that
multiple users can share the Internet.
For MAC OS
1
Click the icon at the right top of your desktop.
2
Make sure the status of Airport is On, and then select
the wireless network name (SSID) of TL-MR3020 and
click it.
(To be continued)