Replacing The Palm-Rest Assembly - Dell Inspiron 14z N411z Owner's Manual

1 palm-rest assembly

Replacing the Palm-Rest Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Align the tabs on the palm-rest assembly with the slots on the computer
base and gently snap the palm-rest assembly in place.
3 Slide the power button, touchpad, and hot-key board cables into the
respective connectors on the system board and press down the connector
latches to secure the cables.
4 Replace the seven screws that secure the palm-rest assembly to the
computer base.
5 Replace the keyboard. See "Replacing the Keyboard" on page 33.
6 Turn the computer over and replace the nine screws that secure the
palm-rest assembly to the computer base.
7 Follow the instructions from step 5 to step 6 in "Replacing the Optical
Drive" on page 25.
8 Replace the module cover. See "Replacing the Module Cover" on page 16.
38
Palm-Rest Assembly
1