1
plastic scribe
Replacing the Coin-Cell Battery
1 Follow the instructions in "Before You Begin" on page 9.
2 With the positive side facing up, snap the coin-cell battery into the battery
socket on the system board.
3 Replace the module cover. See "Replacing the Module Cover" on page 16.
4 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
18
Coin-Cell Battery
Before turning on the computer, replace all screws and ensure that no
2
coin-cell battery
1
2