1
screws (2)
3
mini-card antenna cables
5
display-cable connector
15 Lift the display assembly off the computer base.
Replacing the Display Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the display assembly in position and replace the two screws that
secure the display assembly to the computer base.
NOTE:
the computer base.
3 Route the display, camera, and mini-card antenna cables through their
routing guides.
Ensure that no cables are caught between the display assembly and
1
2
5
2
display assembly
4
camera-cable connector
3
4
47
Display