GE ZISS480NHSS Owner's Manual page 26

Table of Contents

Advertisement

Questions?
PROBLEM
Use this
WATER DISPENSER
DOES NOT WORK
problem
solver!
ICE DISPENSER
DOES NOT WORK
WATER SPURTING
FROM DISPENSER
NO WATER OR ICE
PRODUCTION
CUBED ICE WAS
SELECTED BUT
CRUSHED ICE
WAS DISPENSED
FOOD IS NOT
THAWING/CHILLING
IN CLIMATE
CONTROL DRAWER
SELECT TEMP
FEATURE ON
CLIMATE CONTROL
DRAWER IS NOT
WORKING
CLIMATE CONTROL
DRAWER CONTROLS
DO NOT WORK
26
The Problem Solver
POSSIBLE CAUSE
• Water supply line turned off, restricted or not connected. Call your
installer for proper water supply line connection.
• Water filter clogged. Replace the filter or use the filter bypass plug.
• The CONTROL LOCK on the dispenser has been activated.
To unlock the dispenser, touch CONTROL LOCK for 3 seconds.
• Air may be trapped in system. Press the dispenser arm for at least
2 minutes.
• Ice bin improperly installed. See Ice storage bin.
• Icemaker turned off or water supply turned off. Turn on icemaker
or water supply.
• Ice cubes are frozen to the icemaker feeler arm. Remove cubes.
• Irregular ice clumps in storage bin. Break up with fingertip pressure
and discard remaining clumps.
• Freezer may be too warm. Adjust freezer control to a colder setting,
one position at a time, until clumps do not form.
• Water filter clogged. Replace the filter or use the filter bypass plug.
• The CONTROL LOCK on the dispenser has been activated.
To unlock the dispenser, touch CONTROL LOCK for 3 seconds.
• Newly installed filter cartridge. Run water from the dispenser for
1 1/2 gallons (3 mins) .
• Water supply line turned off, restricted or not connected. Call your
installer for proper water supply line connection.
• Water filter clogged. Replace the filter or use the filter bypass plug.
• Last setting was CRUSHED ICE. A few cubes were left in the crusher
from the previous setting. This is normal.
• If continual crushed ice is dispensed while cubed ice is selected,
adjust ice bin. See Ice storage bin.
• Packaging. Increase time or re-package in plastic.
• Wrong weight selected. Select a larger weight.
• Item with high fat content. Select a larger weight.
• Fresh Food temperature control is set at warmest setting.
This is normal. In order to minimize energy usage, the Select Temp
feature is disabled when the Fresh Food control is set at the warmest
setting.
• Control Lock feature is active. Press and hold the CONTROL LOCK
pad on the Climate Control drawer for 3 seconds.
Built-In Refrigerators

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents