This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
1
Select [ROTATE] on the [PLAYBACK] mode menu. (P18)
•
The [ROTATE] function is disabled when [ROTATE DISP.] is set
to [OFF].
Press 2/1 to select the picture and then press
2
[MENU/SET].
•
Motion pictures and protected pictures cannot be rotated.
3
Press 3/4 to select the direction to rotate the
picture and then press [MENU/SET].
:
The picture rotates clockwise in steps of 90o.
:
The picture rotates counter-clockwise in steps of 90o.
Press [‚] to return to the menu screen.
4
•
Press [MENU/SET] to close the menu.
Rotate display (The picture is automatically rotated and displayed)
1
Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P18)
2
Press 4 to select [ON] and then press [MENU/SET].
•
The pictures are displayed without being rotated when you select
[OFF].
•
Refer to P31 for information about how to play back pictures.
3
Press [MENU/SET] to close the menu.
Note
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
You can do the following if a mark has been added to pictures and they have been set as favorites.
•
Play back only the pictures set as favorites. ([FAVORITE PLAY])
•
Play back the pictures set as favorites only as a slide show.
•
Delete all the pictures not set as favorites. ([ALL DELETE EXCEPTÜ])
Downloaded From camera-usermanual.com Panasonic Manuals
N [ROTATE]/M [ROTATE DISP.]
Rotate (The picture is rotated manually)
Ü [FAVORITE]
Advanced (Playback)
83
VQT1R87