Table of Contents
Advertisement
•
Press Menu 01-3-1 (Messages > Voice messages > Listen to
voice messages). After a brief pause, your phone dials the voice
mail number.
Once you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called "dialing codes" into phone numbers
such as voice mail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voice mail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voice mail service.
WRITE DOWN SOME INFORMATION
1
Write down your voice mailbox number.
2
Call and check your voice mail as you normally would.
3
Write down your step-by-step interaction with the recorded prompts.
Keep in mind that each voice mail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press
1234, press pound key.
Important: Be precise. You will need this information in "Setup
voice mail with dialing codes" later in this section.
LEARN HOW TO INSERT DIALING CODES
repeatedly to cycle through dialing codes. Once the desired code
Press
s
appears in the display, pause briefly and the code is inserted into the
dialing string.
For example, press
Pause briefly and the wait character is inserted into the dialing string.
Available dialing codes are as follows:
four times to display the "w" (wait character).
s
[ 70 ]
Advertisement
Table of Contents
