Table of Contents
Advertisement
*
Bypasses a set of instructions.
+
Precedes an international telephone number.
p
Pauses for 2.5 seconds before sending any numbers that follow.
w
Wait. Your phone waits for you to press
numbers or codes that follow.
Setup voice mail with dialing codes
1
At the Start screen, press Contacts, scroll to 1-touch dialing, and
press Select.
Scroll to an empty 1-touch dialing slot and press Assign.
2
3
Enter your voice mailbox number, including the area code.
4
Refer to the dialing codes table on page 70 and enter any codes as
necessary using the information that you wrote down earlier.
For example, if you pause for 5 seconds after connecting to voice mail,
enter p twice after the voice mailbox number, such as 2145551212pp.
5
Enter any remaining pauses, PIN codes, and other information that
allows you to listen to your messages, then press OK.
6
Enter a name (such as Voice mail) and press OK. A message appears
in the display confirming your 1-touch dialing location has been saved.
Now, to dial and listen to your voice mail, just press and hold the
assigned 1-touch dialing key at the Start screen. No other keypresses
should be necessary to connect and listen to your messages.
• MESSAGE OPTIONS
Some or all of the options in the following table are available for text
messages, picture messages, multimedia messages, and e-mail.
1
While viewing a text, picture, multimedia message, or e-mail
press Options.
h
[ 71 ]
Menu functions
before it sends any
Advertisement
Table of Contents
