Table of Contents
Advertisement
Work with an existing voice command
After you have associated a voice tag to a command, you can choose one
of the following options:
•
Select Playback to listen to the voice command tag.
•
Select Change to change the voice command.
•
Select Delete to erase the voice command tag.
Audible alerts
Audible alerts use a series of beeps to inform you of the current signal
strength or battery level of your phone.
Note: In order to obtain audible alerts, the alerts must first be set
up as voice commands. To set up voice commands, see "Add a voice
tag for the command" on page 122.
Set up audible alerts
1
If you have the optional headset attached, press and hold the
headset button.
OR
Press and hold Contacts (or Go to).
OR
Press and hold the volume down key.
2
When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the tag, Found appears, and the phone plays
the recognized voice tag from the phone memory through the earpiece
The phone then beeps, according to the strengths indicated in the
following table:
Audible alert
Battery bar strength Low
Signal bar strength Weak
One beep Two beeps Three beeps Four beeps
Half-full
Moderate
[ 123 ]
Menu functions
Almost full
Full
Strong
Strongest
Advertisement
Table of Contents
