Also See for D-Link DSP-W215
Related Manuals for D-Link DSP-W215
-
Power Supply D-Link DPS-300 Quick Installation Manual
Quick installation guide (20 pages)
-
Power Supply D-Link DPS-510 Brochure & Specs
Redundant power supply (1 page)
-
Power Supply D-Link DPS-200A Quick Installation Manual
Switching redundant power supply (32 pages)
-
Power Supply D-Link DMC-1001 - Power Supply - hot-plug User Manual
User guide (4 pages)
Summary of Contents for D-Link DSP-W215
-
Page 1
Version 1.2 | 09/24/2014 User Manual mydlink™ Wi-Fi Smart Plug DSP-W215...
-
Page 2: Manual Revisions
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description September 18, 2014 • Initial Release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
-
Page 3: Table Of Contents
Wireless Installation Considerations ........6 Installation and Setup ............7 mydlink™ Home ...............16 My Devices ..................16 DSP-W215 ..................17 Schedule ..................18 Information ...................20 My Actions ..................21 My Places ..................24 Connecting to a Wireless Router ........26 WPS Button ...................26 D-Link DSP-W215 User Manual...
-
Page 4: Product Overview
Section 1 - Product Overview Product Overview Package Contents DSP-W215 mydlink™ Wi-Fi Smart Plug Quick Install Card If any of the above items are missing, please contact your reseller. D-Link DSP-W215 User Manual...
-
Page 5: System Requirements
• iPhone, iPad, or Android smartphone or tablet • For mydlink and mydlink app requirements mydlink Requirements refer to: http://www.mydlink.com Please refer to the mobile app’s store page to check whether your device is compatible. App download link here: http://qrs.ly/e646482 D-Link DSP-W215 User Manual...
-
Page 6: Introduction
Control Your Power Usage From Anywhere With the DSP-W215, you’ll have the ability to control the power supply to electronic devices in your home. Set a schedule that turns your TV off when you’re asleep, or ensures that your desk lamps aren’t left on when you’re at work. The mydlink™ Home app will allow you to switch your appliances on or off in an instant, and change your power schedules on-the-go, ensuring that you don’t have to worry about leaving something on while you’re away.
-
Page 7: Hardware Overview
Light Off The smart plug is powered off. Power Socket Connect your appliances, lamps, and other electronic devices you wish to monitor. Power LED The LED will be solid green if the power socket is powered on. D-Link DSP-W215 User Manual...
-
Page 8: Safety
2. Verify that your Smart Plug devices are electrically rated to operate with the power available in your location. 3. Be sure to plug the power cables into properly grounded electrical outlets in order to help prevent against electrical shock. D-Link DSP-W215 User Manual...
-
Page 9: Wireless Installation Considerations
Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even when the phone is not in use. D-Link DSP-W215 User Manual...
-
Page 10: Installation And Setup
Log into your mydlink account. If you don’t have one, sign up for a free mydlink account by tapping the Sign Up! link. Step 4: The My Devices page will appear. Tap Add a new device. D-Link DSP-W215 User Manual...
-
Page 11
Tap Scan to scan the QR code on the device label or configuration card. Tap Skip QR Code, select your device from the drop-down menu, and proceed to step 6. Step 6: Plug your Smart Plug into an available outlet. Tap Next to continue. D-Link DSP-W215 User Manual...
-
Page 12
Note: Refer to your router’s documentation if you are not sure if your router supports WPS. If your router does not support WPS or you want to manually connect to your wireless router, tap Manual and then go to step 8-2. D-Link DSP-W215 User Manual...
-
Page 13
Note: You must press the WPS button on your router first and then on the Smart Plug within two minutes. After about two minutes, the Status LED will turn solid green. This indicates that the Smart Plug has successfully connected to your wireless router. Tap Next to continue. D-Link DSP-W215 User Manual...
-
Page 14: Manual Setup
The app may ask if you wish to connect to your current Wi-Fi. Tap Yes or No. Enter the PIN code and tap Next. This code is located both on the back of the Smart Plug and the Quick Install card. D-Link DSP-W215 User Manual...
-
Page 15
A list of discovered wireless networks will appear. Select your wireless network by tapping your wireless network name (SSID). If your wireless network requires a password to connect, enter it at the prompt and tap OK. D-Link DSP-W215 User Manual...
-
Page 16
On your mobile device, go to Settings > Wi-Fi. Connect to your wireless router and enter your Wi-Fi password (if you have one). Go back to this app and tap Next to continue. Your device will now scan your network for Smart Plugs. D-Link DSP-W215 User Manual...
-
Page 17
3. Tap Check Hardware Settings and verify the settings. 4. Tap Search Again to rescan. Step 10: Enter a customized name for your Smart Plug. Tapping the image changes the icon for your device. Otherwise tap Finish. D-Link DSP-W215 User Manual...
-
Page 18
You can turn the device on and off by tapping Power, or schedule the device to power on and off at certain times of the day by tapping Schedule. Finally, for information about the device status, tap Device Information. D-Link DSP-W215 User Manual...
-
Page 19: Mydlink™ Home
Home My Devices Tapping DSP-W215 (or the custom name you assigned to it) on the My Devices page will take you to the device’s settings. On the selected device page, you can change the icon or the device name by simply tapping on it.
-
Page 20: Dsp-w215
See Information on page 20. To change the smart plug name or associated icon, tap the name or the DSP-W215 DSP-W215 icon respectively, and enter the new name or use the menu to select the new icon. DSP-W215 DSP-W215 D-Link DSP-W215 User Manual...
-
Page 21: Schedule
Section 3 - Configuration Schedule In this section you can customize schedules that control when your DSP-W215 will be active. Tapping on the gear icon from the My Places page will display the Schedule function. There are two types of schedules you can configure: Basic and Advanced.
-
Page 22
To activate the schedule after the schedule is configured, go to the My Devices page (see My Devices on page 16) and tap on a device. Tap Schedule and select the custom schedule you’ve just configured to apply it to the device. D-Link DSP-W215 User Manual...
-
Page 23: Information
MAC Address: Displays the MAC address of the device. IP Address: Displays the IP address of the device. mydlink Displays the mydlink number of the device. Number: Factory Reset: Tap Reset to perform a factory reset. D-Link DSP-W215 User Manual...
-
Page 24: My Actions
Section 3 - Configuration My Actions This page lets you add and enable/disable rules which execute actions such as notifications when your DSP-W215 detects motion. 1. To add a new rule for you device, tap on New rule. 2. Tap on the device you want to trigger with the rule.
-
Page 25
Section 3 - Configuration 4. Select from the available responses for this device. 5. Select from the available actions for this device. Tap Next. 6. In the text box, type in a name for this rule and tap Done. D-Link DSP-W215 User Manual...
-
Page 26
Section 3 - Configuration 7. You will be taken back to the My Actions page and you can now enable or disable your rule from this page. 8. To delete the rule, swipe right and tap the trash icon. D-Link DSP-W215 User Manual...
-
Page 27: My Places
2. On the New Group page, tap the icon to choose an icon or photo for the group. Tap next to it to enter a name for the group. Then tap the + icon to add devices. 3. Tap the devices to be included in this group and tap Done. D-Link DSP-W215 User Manual...
-
Page 28
Section 3 - Configuration 4. Your group is created and will show up in My Places. Tapping each device in the group will take you to their settings. D-Link DSP-W215 User Manual...
-
Page 29: Connecting To A Wireless Router
Step 1 - Press the WPS button on your wireless device. Step 2 - Press the WPS button on the DSP-W215 for about 1 second. The status LED on the device will start to blink. Step 3 - Once the Status LED light stops blinking and turns solid green, you will be connected and your wireless connection will be secured.
-
Page 30: Troubleshooting
Why can’t I connect to my wireless router? If you are having trouble connecting to your wireless router, try plugging the DSP-W215 into a location that is closer to your router. After the Power LED turns solid green, you can unplug the Smart Plug and move it to the desired location.
-
Page 31: Technical Specifications
• Consumption: Maximum 5 W • 125 grams (4.41 ounces) • Maximum output power: 1800 W Temperature • Operating: 0 to 40 °C (32 to 104 °F) • Storage: -20 to 65 °C (-4 to 149 °F) D-Link DSP-W215 User Manual...
-
Page 32: Contacting Technical Support
• Hardware Revision (located on the label on the device (e.g., rev A1)) • Serial Number (s/n number located on the label on the device). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
-
Page 33: Warranty
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
-
Page 34
Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
-
Page 35
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
-
Page 36
Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer.
-
Page 37: Limitation Of Liability
FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
-
Page 38
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.to match the intended destination. The firmware setting is not accessible by the end user. D-Link DSP-W215 User Manual...
-
Page 39
Cet equipement est conforme aux limites d’exposition aux rayonnements IC etablies pour un environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DSP-W215 User Manual...
-
Page 40: Registration
Appendix D - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.2 September 18, 2014 D-Link DSP-W215 User Manual...
Comments to this Manuals
Latest comments: