Download Print this page

D-Link Mydlink DSP-W215 Quick Install Manual

Wi-fi smart plug
Hide thumbs

Advertisement

Quick Links

mydlink™
Wi-Fi Smart Plug
DSP-W215
Quick Install Guide

Advertisement

loading

  Also See for D-Link Mydlink DSP-W215

  Related Manuals for D-Link Mydlink DSP-W215

No related manuals

  Summary of Contents for D-Link Mydlink DSP-W215

  • Page 1 mydlink™ Wi-Fi Smart Plug DSP-W215 Quick Install Guide...
  • Page 2: Package Contents

    • For mydlink and mydlink app requirements refer to: http://www.mydlink.com © 2014 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries. All other third-party marks mentioned herein may be trademarks of their respective owners. This publication may not be reproduced, in whole or in part, without prior express written permission from D-Link Systems, Inc.
  • Page 3: Before You Begin

    Safety 1. Do not open the device or attempt to repair or service it. 2. Use the device in a dry location, and avoid placing it in a humid environment. 3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents.
  • Page 4: Hardware Overview

    Hardware Overview Front View ON/OFF Button Status LED WPS/Reset Button Power LED Outlet Press for one second to start the WPS connection process. The Status LED will start to blink green. WPS/Reset Button Press and hold until the Status LED turns red in order to reset the device back to Reset the factory default settings...
  • Page 5: Installation

    Installation Download the free mydlink Home app from the App Store (iOS) or Google Play (Android). First install the mydlink Home app on your mobile device. Then simply tap on the icon to launch the app. Log into your mydlink account. If you don’t have one, sign up for a free mydlink account by clicking on the Sign Up! link.
  • Page 6 FAQs 1. How do I reset the DSP-W215? WPS/Reset When you reset your DSP-W215, it will change your settings back to the factory default settings. To reset the device, locate the WPS/Reset button on the side of the device. With the device plugged in, press and hold the WPS/reset button until the status LED turns red (for about 10 seconds).
  • Page 7: Gpl Code Statement

    Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
  • Page 8: Technical Support

    Version 1.2 June 20, 2014 ©2014 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11ac and 802.11n specifications.