Product Specific Problems - Dell S2716DG User Manual

Product Specific Problems

Specific
Symptoms
Screen image is Image is
too small centered on
screen, but does
not fill entire
viewing area
Cannot adjust OSD does not
the monitor appear on the
with the screen
buttons on the
front panel
No Input Signal No picture, the
when user LED light is white
controls are
pressed
The picture The picture
does not fill the cannot fill the
entire screen height or width
of the screen
What You
Experience
• Reset the monitor to factory settings.
• Turn Off the monitor, unplug the power cord, plug it back,
and then turn On the monitor.
• Check the signal source. Ensure the computer is not in the
power saving mode by moving the mouse or pressing any
key on the keyboard.
• Check whether the signal cable is plugged in properly. Re-
plug the signal cable if necessary.
• Reset the computer or video player.
• Due to different video formats (aspect ratio) of DVDs, the
monitor may display in full screen.
• Run the built-in diagnostics.
Possible Solutions
Troubleshooting
43
|