ZALMAN TNN 500AF User Manual page 31

6) Installing the Heatpipe VGA Cooler
TYPE
Block
ATI
NVIDIA
Matrox
NOTE) If the VGA card interferes with certain components of the case, stop and refer to the
following website (www.zalman.co.kr/product/TNN500AF.html), and replace the VGA
card with one that is recommended.
As you install the VGA card, move the VGA Case Block Base vertically as needed to
accommodate the VGA card.
① Remove the Stock VGA Cooler on the VGA card and clean off the exposed contact surface
completely.
NOTE) Be extremely careful when taking off the Stock VGA Cooler. Zalman is not responsible
for any damages Due to user negligence during the Cooler's removal.
TNN 500AF
VGA Block Base A
ATI Radeon Series
GeForce 4 Ti Series
GeForce 3 MX Series
VGA Case
Block Base
VGA Block Base B
-
FX 5900 Series
GeForce 6800 Series
Parhelia