8
Installation Guide
1) Opening and Disassembling the TNN500AF Case
① As shown in the diagram, lay the TNN500AF down on a flat surface and open the front door.
② Open the latch with the key.
③ Unscrew four bolts (PH M5x15-S) on the Left Heatsink Plate and open the plate as shown.
④ Remove the blocks and Heatpipes in an orderly fashion using a screwdriver and store them
in a safe place.
The Bushings and the bolts separated at the
time of the CPU Block' s removal are simply
for packaging purposes and are not used for
the actual assembly of the system.
TNN 500AF
Latch
Bolt (PH5x15-S)
CPU Block
Left Heatsink Plate
Front Door
Bolt
}
(PH M3x60)
Packing
Parts
Bushing
(34mm)