ZALMAN TNN 500AF User Manual page 40

10) Connecting the Remote Control receiver and USB Cables
▶ Two Available Dual USB Port on the Motherboard
① To Use the Remote Control Function
- Plug the Dual USB-A Connector into the Dual USB Port on the motherboard(M/B).
Dual USB-A Connector
M/B
M/B Dual
USB Port
Note)
1) As shown below, there are two types of USB cables (USB-A & USB-B).
Please connect the cables according to the instructions in this guide.
Dual USB-A Cable Dual USB-B Cable
2) Verify the location and the layout of the USB headers from the motherboard manual.
TNN 500AF