Brake/Parking Brake/Low Oil Level Pilot Lamp (Red); Gear Shift Lever Or Rer Button - Lynx Rave 440 Operator's Manual

Make sure parking brake is fully disengaged before operating the snowmobile.
Hydraulic brake
To engage mechanism, squeeze brake lever and maintain while pulling locking lever with a
finger. Brake lever is now compressed halfway applying brakes.
To release mechanism, squeeze brake lever. Locking lever will automatically return to its
original position. Brake lever now returns to rest position. Always release parking brake befo-
re riding.
Locking keeps brake lever engaged and keeps pressure against brake disc.
Anyhow, this pressure may decrease so low, that it will not keep vehicle in place.
Never leave the snowmobile on hill only with parking brake applied.
1. Locking lever
2. OFF
3. ON

4. Brake/Parking brake/Low oil level pilot lamp (Red)

Lights when brake or parking brake is applied (with engine running).
This pilot lamp also lights up when injection oil level is low (with engine running). Check oil
level and replenish as soon as possible.

5. Gear shift lever or RER button

Touring V-1000: This model is equipped with a mechanical reverse controlled by a 2-position
gear shift lever.
WARNING!
WARNING!
12