Brake/Parking Brake/Low Oil Level Pilot Lamp (Red); Gear Shift Lever Or Rer Button - Lynx 5900 Operator's Manual

Step 1: Squeeze and hold
Step 2: Fully pull
Hydraulic brake
To engage mechanism, squeeze brake lever and maintain while pulling locking
lever with a finger. Brake lever in picture 1 is compressed 25% of applying brakes
and in picture 2 is compressed 50% of applying brakes.
To release mechanism, squeeze brake lever. Locking lever will automatically re-
turn to its original position. Brake lever now returns to rest position. Always re-
lease parking brake before riding.
Locking keeps brake lever engaged and keeps pressure against brake disc.
Anyhow, this pressure may decrease so low, that it will not keep vehicle in
place. Never leave the snowmobile on hill only with parking brake applied.
1. Locking lever
2. Position 1
3. Position 2

4. Brake/Parking brake/Low oil level pilot lamp (Red)

Lights when brake or parking brake is applied (with engine running).
This pilot lamp also lights up when injection oil level is low (with engine running).
Check oil level and replenish as soon as possible.

5. Gear shift lever or RER button

Gear box models: These models are equipped with 4-position gear shift lever; 2
gears forward, reverse gear and free position between 1. and 2. gear.
WARNING!
14