Table of Contents
Advertisement
SECTION 1
7. Turning off the Power
Notes on turning off the power
The following precautions must be observed when switch off the power.
Be sure to close the operating system and wait until the SUS/RES Indicator (
indicator LCD turns off prior to turning off the power with the MAIN switch.
When the system is in Suspend Mode, resume the PC activity first and save the data and
close the operating system prior to turning off the power.
When you restart the PC after turning off the power, be sure the power is off for 10 seconds
or more.
Turn off the MAIN switch when;
- taking the PC with you,
- connecting or disconnecting peripheral devices, or
- the battery level is low or saving the power.
How to turn off the Power
Windows Me, Windows 98, or Windows 95
1
Go to Start Button Menu and click on Exit Windows.
Exit Windows dialog box appears.
2
For Windows Me, select Exit and click on OK.
Verify [Shut down the power?] for Windows 98, and [Shut down the computer?] for Windows
95 are selected respectively and click on OK or Yes.
The operating system will be closed and the power will turn off. Status indicator LCD (
will turn off.
Critical Point
If you do not put the MAIN switch in the Off position after step 2, you should use SUS/RES
Switch to turn on your PC.
If you use the One Touch Button, do not perform the step 3.
On the screen that appears in step 1, selecting [Restart] or [Restart the computer?] will start
up the PC again. Restart means the procedure to erase the information in the memory once
and start to read the operating system from a floppy disk or hard disk again.
With Windows Me and Windows 98, selecting Standby or Suspend on the screen that ap-
pears in step 1 will set the PC in Power Saving Mode.
22
) of Status
)
Advertisement
Table of Contents
