Fujitsu b2178 Manual page 22

8
Num Lock (Numerical Lock) Indicator (
This indicator appears when the keyboard is set to numeric keypad mode. You can set and reset
the numeric keypad mode by pressing the [Num Lk] key.
9
Caps Lock Indicator (
This indicator appears when the keyboard is set for all capital letters. You can activate or deactivate
the Caps Lock Mode by pressing [CapsLock] key.
0
Scroll Lock Indicator (
This indicator appears when scroll lock is set to avoid screen scrolling. You can set and reset the
scroll lock by pushing down the [Scr Lk] key while pressing down the [Fn] key.
The function depends on the application when this indicator appears.
!
Security Indicator (
This indicator appears when security function is on. You must input password if the security
indicator blinks when you put on the power of the PC unit.
Critical Point
If you turn off the MAIN SWITCH or operate SUS/RES switch while the hard disk access
indicator appears, the data on the hard disk may be corrupted.
When the MAIN switch is turned off, all of the indication in the status indicator LCD disappears
except for during charging.
Some operating systems call Slot 1 as "Slot 0" and Slot 2 as "Slot 1" on the PC card access
indicator.
12
)
)
)
)