Fujitsu b2178 Manual page 24

How to use Quick Point IV
Controlling Stick
How to press buttons
• Clicking
• Double-Clicking
• Dragging
Critical Point
These button operations described above are the operations when [Right-handed] is selected
in the [Mouse Property] dialog box.
When you continue to move the mouse pointer slowly for several seconds while slanting the
Quick Point IV Stick slightly, the mouse pointer may move the other way around, but this
should not be regarded as a failure. In this case, wait until the mouse pointer stops.
14
Put your finger tip on the stick and press it up,
down, left or right and the mouse pointer will
Mouse Pointer
move accordingly. Try to press the stick while
confirming the mouse pointer movements on
the screen.
Note that the mouse pointer may move
spontaneously but this should not be regarded
as a failure. In this case, wait until the mouse
pointer stops (about 3 seconds) before you
move it.
Clicking means pressing the upper button once
and releasing it immediately. Pushing the lower
button once is the Right Clicking.
Double-Clicking means pressing the upper
button twice in rapid succession and releasing
it immediately.
Dragging means, while keeping the upper button
depressed, moving the mouse pointer by
pressing the stick to the desired location and
releasing the button.