Using Mouse; Connecting A Ps/2 Mouse - Fujitsu b2178 Manual

SECTION 2

7. Using Mouse

Connecting a PS/2 mouse

This PC product supports connection of a PS/2 mouse to the extended keyboard/mouse
connector on the connector box. This section explains the connecting procedure of a mouse.
1 Turn off the power to the PC.
2 Install the connector box.
3 Connect a mouse.
Connect a mouse to the extended keyboard/
mouse connector on the connector box.
Conect it with the engraved arrow mark facing
up.
4 Make settings other than [Configuration 1] for [Pointing Device] of [Keyboard/Mouse
Setting] under the [Details] menu of the BIOS Setup Utility.
Critical Point
If the connector box is attached with your PC, you can connect a mouse in Suspend Mode.
You can select settings for simultaneous use with Quick Point IV and Hot Plug functions in
[Keyboard/Mouse Setting] of the BIOS Setup Utility.
If you want to use wheel functions with a PS/2 mouse, you should make the following setting.
Note that if you make this setting, the Touch Panel and the Quick Point IV cannot be used.
- In the [Pointing Device Setting] of the BIOS Setup Utility, set [Configuration 4] and delete
the touch panel driver.
Extended keyboard/
mouse connector
51