Table of Contents
Advertisement
SECTION 1
6. Turning on the Power
Notes on Putting the Power On
When the power is On, do not carry the PC around, or subject it to shocks or vibration, as you
risk damaging your PC.
If you turn on the power to the PC when it is connected with FDD unit, remove a floppy disk if
any is inserted in the drive.
How to Put the Power On
This section explains the normal procedure to turn on the power.
1
Connect the AC adapter to your PC.
DC-IN Connector
2
3
(1)Connect the cord of the AC adapter.
(2) Connect the adapter to the DC-IN connector
on the PC unit.
(3) Connect the plug to a socket.
3
Turn on the MAIN switch of the PC.
Power will be supplied and POST will start.
Status indicator LCD such as (
On.
20
1
MAIN switch
) will turn
2
Open the LCD Display
Latch
Press the front latch to unlock and open the
LCD Display.
Advertisement
Table of Contents
