Fujitsu b2178 Manual page 26

How to use Touch Panel
• Clicking
• Double-Clicking
• Dragging
Critical Point
Other operations
The following operations can be performed on Touch Panel. Use Quick Point IV for the others:
- To open submenu, touch the desired item in the menu.
- To select an icon, press the panel near the desired icon lightly with the pen and drag it onto
the icon and the icon will be inverted.
- To right-click on the icon, you can do it in the following ways:
• Press the [
Press the panel near the desired icon lightly with the pen and drag it onto the icon. Then
press the [
• Press the [Ctrl] key.
There are two ways. One is to touch the icon while pressing the [Ctrl] key and the other is
to press the [Ctrl] key once and then touch the icon.
Go to Start Button Menu and click on [Program] > [Fujitsu Touch Panel] > [Touch Panel
Setting] and then [Touch Panel Setting] dialog box will appear. Select the functions you
want to use by check them and click on OK.
- To right-click on other items, use the Quick Point IV.
- When task bar icon cannot be displayed, operate by using the Quick Point IV.
Which one of Touch Panel, Quick Point IV, or external PS/2 mouse to be selected to use.
To use PS/2 mouse that is equipped with a driver such as IntelliMouse
required to uninstall the Touch Panel. In order to use Touch Panel again, re-install the Touch
Panel driver.
16
] (application) key.
] (application) key.
Touch once on the screen lightly and release the
pen immediately.
Touch twice in rapid succession on the screen and
release the pen immediately.
While pushing the pen lightly on the screen and
draw it.
TM
from Microsoft, it is