Panasonic DP-8020E Operating Instructions Manual page 55

Hide thumbs Also See for DP-8020E:
Table of Contents

Advertisement

■ General Settings (For Key Operator) (Continued)
No.
08
SPECIAL TRAY 2
09
KEY/TOUCH BEEP
10
BYPASS SET BEEP
11
ORIG.SET BEEP ADF
12
PAPER OUT ROTATE
13
DEPT. COUNTER MODE
16
LANGUAGE PRIORITY
17
DATE & TIME
18
DAYLIGHT TIME
IP ADDRESS (DHCP) *
19
SUBNET MASK(DHCP) *
20
DEF. G/W IP(DHCP) *
21
DHCP DEFAULT ∗
22
NOTE
∗1 When setting other than DHCP server Network settings, Parameter No. 22 (DHCP DEFAULT) should be set to "INVALID"
first, then setup Parameters No.19 to 21.
∗2 When Parameters No. 19 to 23 (except 22) are set, cycle the power by turning the Power Switch on the Right Side of the
machine OFF and ON.
∗3 When not connecting to LAN, the setting of DHCP should be on INVALID. When the setting of DHCP is on VALID, and the
machine is in Shutdown Mode, the machine will not answer an incoming Fax call.
Downloaded From ManualsPrinter.com Manuals
Modes
Selects the paper tray to use for special paper.
1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /
5:TRAY-4 / 6:BYPASS
(Only available when optional TRAY-2 and 3/4
are installed. see page 69)
Selects the default key sound level.
1:OFF / 2:SOFT / 3:LOUD
Selects whether to sound a Beep when paper is 1:INVALID
set on the Sheet Bypass.
1:INVALID / 2:VALID
Selects whether to sound a Beep when paper is 2:VALID
placed on the ADF.
1:INVALID / 2:VALID
Machine will automatically rotate the image to
accommodate the orientation of the paper in another
Tray and print when the selected Tray is empty.
1:OFF / 2:ON
Monitors the copy usage of each department.
1:TOTAL COUNTER
2:DEPT. COUNTER
3:DEPARTMENT LIST
Selects whether to enable the language
selection menu to display when the machine
comes out of the Energy Saver Mode, or when
the RESET button is pressed once.
1:OFF / 2:ON
Sets the date and time.
(Month, Day, Year, Time)
Input the date and time with Cursor Keys and
Keypad.
Set Daylight Time according to your local
regulation.
1: OFF
2: MAR 2nd : From 2 a.m. on the 2nd Sunday
• The date setting shown above reflects the New
Regulation starting in 2007. In 2006, the Daylight
Time will end on the Last Sunday of October.
3: APR 1st : From 2 a.m. on the 1st Sunday of
1,
*
2
Displays the IP Address which was reserved by
DHCP server.
1,
*
2
Displays the Subnet Mask Address which was
reserved by DHCP server.
*
1,
2
Displays the Gateway IP Address which was
reserved by DHCP server.
3
Selects whether to enable the DHCP.
1:INVALID / 2:VALID
Function
: Daylight Time is not applied
of March to 2 a.m. on the 1st
Sunday of November
April to 2 a.m. on the Last Sunday
of October
<continue on the next page.>
Initial
Setting
1:NONE
2:SOFT
1:OFF
Consult your
authorized
Panasonic dealer
1:OFF
2: MAR 2nd
2:VALID
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8020p8016p

Table of Contents