Troubleshooting; Self-Test; Safety Instructions - Dell SE2417HG User Manual

Troubleshooting

WARNING: Before you begin any of the procedures in this section, follow the
Safety instructions.

Self-test

Your monitor provides a self-test feature that allows you to check if your monitor is
functioning properly. If your monitor and computer are properly connected but the
monitor screen remains dark, run the monitor self-test by performing the following
steps:
1. Turn off both your computer and the monitor.
2. Disconnect all video cables from the monitor. This way, the computer doesn't
have to be involved.
3. Turn on the monitor.
If the monitor is working correctly, it detects that there is no signal and one of the
following message appears. While in self-test mode, the power LED remains white.
Dell SE2417HG
Dell SE2417HG
Dell SE2417HG
? No VGA Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
No HDMI1 Cable
?
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
No HDMI2 Cable
?
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
Troubleshooting
31
|