Dell SE2417HG User Manual page 27

OSD warning messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
Dell SE2417HG
When the monitor does not support a particular resolution mode, the following
message is displayed:
Dell SE2417HG
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
Before the DDC/CI function is disabled, the following message is displayed:
Dell SE2417HG
When the monitor enters the Power Save Mode, the following message appears:
Dell
SE2417HG
Entering Power Save Mode.
To allow manual adjustment of brightness, the Dynamic Contrast
will be switched off.
Do you want to continue?
The current input timing is not supported by the monitor display.
Please change your input timing to
other monitor listed timing as per the monitor specifications.
Monitor specifications
The function of adjusting display setting using PC application will
be disabled.
Do you wish to disable DDC/CI function?
No
Yes
1920x1080, 60Hz
or any
for the Horizontal and Vertical
No
Yes
Operating your monitor
27
|