Setting Up The Monitor; Connecting The Stand - Dell S2317HJ User Manual

Setting Up the Monitor

Connecting the Stand

NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: The following steps are applicable for a monitor with a stand.
To attach the monitor stand:
1. Remove the cover and place the monitor on it.
2.
Insert the stand base blocks fully into the stand slot.
3.
Turn the screw clockwise. After fully tightening the screw, fold the screw handle
flat within the recess.
4.
Fit the two tabs on the upper part of the stand to the groove on the back of the
monitor.
5. Press the stand till it snaps into place.
4
2
Setting Up the Monitor
3
13
|