Table of Contents
Advertisement
Replacing the lamp (continued)
When removing the lamp from the ceiling-mounted projector
When removing the lamp from the ceiling-mounted projector, use the lamp replacement tray packed with the projector
or option lamp to prevent glass fragments from scattering.
• Assemble the lamp replacement tray according to the procedure shown on it.
1. Follow steps 1 to 4 on page 45.
2. Attach the lamp replacement tray to the
projector as shown in the figure.
3. Secure the lamp replacement tray on the
projector using the tapes packed with the
tray.
4. Pull out the lamp box by the handle while
holding the projector.
• Hold the lamp replacement tray
to prevent glass fragments from
scattering.
• Don't put the lamp directly on the lamp
replacement tray because it may fall.
5. Detach the lamp replacement tray together
with the removed lamp.
6. Follow steps 6 to 14 on page 45.
EN-46
Tapes
Advertisement
Table of Contents
