Display - Hotpoint CTD90 Instructions For Installation And Use Manual

Start and Programmes
Programmes
GB
! If the On/Off light is not lit; Press the ON/OFF button
Programme What it does...
Cottons Dries your Cotton
High Heat
clothes on High heat.
Dries your Cotton
Cottons
Low Heat
clothes on Low heat.
Dries your Synthetic
Synthetics
clothes on High heat.
Dries your Woollen clothes,
Woolmark
(see previous page).
Delicates Dries your clothes on Low
heat setting, ready to be
(e.g. Acrylics)
worn.
20-minute programme
Airing
that airs your clothes with
cool air. Use also to cool
warm clothes.
Brief programme
Easy Iron
(approximately 10 minutes)
that softens fibres of
clothing that is ready for
ironing.
Timed
Always use Timed Drying
Timed Drying
for loads less than 1kg, or
(
0:20, 0:40, 1:00,
if you prefer a different
1:20, 1:40, 2:00
dryness result.
or 2:20
)
Hours:Minutes
The heat setting depends
on the material option
selected: The display will
show LOW HEAT or HIGH
HEAT, as appropriate.
8
and then select programme.
How to set it...
1. Press the Cottons - High Heat
2. Select Timed Drying or Dryness Levels
option.
- If Timed Drying, see below, or...
- To change from default dryness
setting press and release Dryness
Levels button until the required level
has an indicator next to it.
3. Select any Options if required.
4. Press the Start button.
1. Press the Cottons - Low Heat
2. Select a drying time, see Timed below
1. Press the Synthetics
2. Select Timed Drying or Dryness Levels
option.
- If Timed Drying, see below, or...
- To change from default dryness
setting press and release Dryness
Levels button until the required level
has an indicator next to it.
3. Select any Options if required.
4. Press the Start button.
1. Press the Wool button.
2. Select Alarm option if required.
3. Press the Start button.
1. Press the Delicates button.
2. If Timed programme required (see
Timed below). Otherwise default is Set &
Forget.
3. Select any Options, if required.
4. Press the START button.
1. Press the Airing button.
2. Select Alarm option if required.
3. Press the Start button.
1. Press the Easy Iron button.
2. Select Alarm option if required.
3. Press the Start button.
1. Press and release the Timed button
until the display shows the required
selection. Each press advances
, , , , ,
then repeats.
Delicates have maximum time of
When OFF is displayed, Set & Forget
option is available if you change your
mind.
3. Select any Options if required.
4. Press the Start button.
Note:
button.
Options available:
Alarm , Time Delay,
Pre Care
Post Care
Dryness options:
Options available:
button.
See Timed below.
.
button. Options available:
Alarm , Time Delay,
Pre Care
Post Care
Dryness options:
Options available:
Alarm
A Set & Forget programme.
Options available:
Alarm , Time Delay,
Pre Care
Post Care
The default is Set & Forget.
Options available:
Alarm
! This is not a drying
programme (see previous
page).
Options available:
Alarm
Options available:
Alarm , Time Delay,
,
Pre Care
then OFF and
Post Care
.
Consult suggested drying
times (see Laundry).
The last 10 minutes of these
programmes is the Cool
Tumble phase.
,
.
Set & Forget
default shown
,
.
Set & Forget
default shown
,
.
,
.