Table of Contents
Advertisement
The Display
The Display has three main functions, each with its corresponding button.
GB
Dryness Sensing Levels
After selecting a programme that has a Sensor Dry option, press and release the button until the required
dryness sensing level is displayed. If the sensing option is not available with your selected programme, the
display will flash and the buzzer will beep three times.
! Some sensing programmes do not have all seven dryness level options available.
Dryness levels:
Damp Dry:
Iron Dry:
Hanger Dry Plus: Dries your delicate items ready to be hanged for final drying.
Hanger Dry:
Light Dry:
Cupboard Dry:
Extra Dry:
Timed Dry
After selecting a programme that has a Timed Dry option, press the Timed Dry button and the Timed Dry
icon
(see Start and Programmes). Each programme that has a timed option has different times available and
the selection of up to 11 drying times will also depend on the heat setting that you have selected.
Each press of the button decreases the drying time.
If you change your mind, press the Sensor Dry button and the sensing level options are available.
If the Timed Dry option is not available the display will flash and the buzzer will beep three times.
The selected time remains displayed after the programme starts and can be changed during the
programme if you wish.
Delay Timer
After selecting a programme that has a Delay Timer option, a delay start time can be selected.
Each press of the Delay Timer button
to
delay.
For delays of 10 hours or more the display counts down the time in hours until 10 hours, then the
display shows
For delays 9 hours or less the display shows hours and minutes and then counts down in minutes for
all of the delay.
After the START/PAUSE button
When the delay period finishes the delay icon
Note: During this period the clothes will tumble occasionally to help prevent creases developing.
Time to End
If the delay icon
When timed programmes are selected the time displayed throughout the cycle is the actual time remaining.
When Automatic programmes are selected the time displayed is an estimate of the time remaining: When the
programme is selected the display shows the time required to dry a full load. The time remaining is constantly
monitored during the drying cycle and is updated to show the best forecast.
The Time to End is displayed in hours and minutes and counts down each minute.
The colons between the hours and minutes in the display flash to show the time is counting down.
The display also shows if there is a problem with your dryer, if this occurs the display will show F followed by a fault
code number, the three option lights and the START/PAUSE light will also flash amber (see Troubleshooting).
8
Dries your items ready to be ironed using a machine or rotary ironer.
Dries your items ready to be ironed with a hand iron.
Dries your items ready to be hanged for final drying.
Dries your delicate items ready to be put away.
Dries your items ready to be put away.
Dries your items ready to be worn.
will light, the display will reduce the selected time each time you press and release this button
9:30
and then increments from
and then continues to count down in minutes.
9.59
is off the time displayed is the Time to End for the programme running.
advances the delay setting in 30 minutes increments from
10h
to
then
OFF
and then after five seconds cancels the
24h
is pressed the delay time can be changed or cancelled.
is off and the Time to End is displayed.
0:30
Advertisement
Table of Contents
