Do you have a question about the Aquarius CTD00 and is the answer not in the manual?
Questions and answers
Edward Howarth
March 6, 2025
How do I clean filter on CTDOO Aquarius
1 comments:
Mr. Anderson
March 6, 2025
To clean the filter on the Hotpoint Aquarius CTD00 tumble dryer, follow these steps:
1. Open the door of the dryer. 2. Pull out the filter using the two finger grips. 3. Remove any fluff deposits from the filter mesh. 4. Refit the filter securely—never run the dryer without the filter in place.
Failure to clean the filter after every drying cycle will reduce drying efficiency, making the cycle longer and increasing electricity consumption.
This answer is automatically generated
Edward Howarth
March 6, 2025
How do I clean the filter of CTDoo Aquarius
1 comments:
Mr. Anderson
March 6, 2025
To clean the filter of the Hotpoint Aquarius CTD00:
1. Unplug the dryer and open the door. 2. Pull the plastic grip of the filter upwards. 3. Rinse the filter under running water or use a vacuum cleaner to remove lint and fluff. 4. Ensure the filter is fully dry before replacing it. 5. Insert the filter back correctly, ensuring it is fully located flush into the slot.
Page 10
see Installation see Maintenance see Laundry see Laundry see Maintenance Maintenance see Maintenance see Installation see Service see Maintenance...
see diagram see diagram see Service see diagram...
Page 12
see Maintenance see Maintenance Maintenance see Start and Programmes see Laundry see Maintenance see Laundry see Laundry see Service see Start and Programmes see Start and Programmes see Laundry see Installation...
Need help?
Do you have a question about the Aquarius CTD00 and is the answer not in the manual?
Questions and answers
How do I clean filter on CTDOO Aquarius
To clean the filter on the Hotpoint Aquarius CTD00 tumble dryer, follow these steps:
1. Open the door of the dryer.
2. Pull out the filter using the two finger grips.
3. Remove any fluff deposits from the filter mesh.
4. Refit the filter securely—never run the dryer without the filter in place.
Failure to clean the filter after every drying cycle will reduce drying efficiency, making the cycle longer and increasing electricity consumption.
This answer is automatically generated
How do I clean the filter of CTDoo Aquarius
To clean the filter of the Hotpoint Aquarius CTD00:
1. Unplug the dryer and open the door.
2. Pull the plastic grip of the filter upwards.
3. Rinse the filter under running water or use a vacuum cleaner to remove lint and fluff.
4. Ensure the filter is fully dry before replacing it.
5. Insert the filter back correctly, ensuring it is fully located flush into the slot.
This answer is automatically generated