Controls & Features
Start/Reverse Button
The start/reverse button is used for starting the engine. Pushing the button in
starts the engine. See
When the start/reverse button is pushed, the starter motor will crank the engine;
the headlight will automatically go out, but the taillight will stay on.
The starter motor will not operate if the engine stop switch is in the OFF
position when the start/reverse button is pushed.
The start/reverse button is also used for reverse riding. See
66
Reverse (RVS) Switch
The reverse switch is used to shift into reverse gear so you may back up your
motorcycle. For instructions, see
Cruise Control Switches
Three switches are used to activate, adjust, and de-activate the cruise control
system: a cruise control master switch, a SET/DECEL switch, and a RESUME/
ACCEL switch. For operating instructions, see
77
32
Downloaded from
www.Manualslib.com
Starting the Engine,
.
.
Instruments & Controls
manuals search engine
page
62
.
Reverse Riding,
page
66
Riding with Cruise Control,
Reverse Riding,
page
.
page