Engine Stop Switch
RIGHT HANDLEBAR
CRUISE CONTROL master switch
The engine stop switch is used to stop the engine in an emergency. To operate,
turn the switch to the OFF position. The switch must be in the RUN position to
start the engine, and it should normally remain in the RUN position even when
the engine is OFF.
If your motorcycle is stopped with the ignition switch ON and the engine stop
switch OFF, the headlight and taillight will remain on, resulting in battery
discharge.
Downloaded from
www.Manualslib.com
reverse (RVS) switch
manuals search engine
Controls & Features
engine stop switch
RESUME/ACCEL switch
SET/DECEL switch
start/reverse button
Instruments & Controls
OFF
RUN
31