If a Fuse Blows
Main Fuse Access:
4.
Check the two main fuses (A & B) to see if they are blown.
Speed Limiter Fuse Access:
5.
Check the speed limiter fuse to see if it's blown, see your Honda dealer for
this service.
Circuit Fuses Access:
6.
To check or replace a circuit fuse, pull the old fuse out of its retaining clips
with the fuse remover. Look for a burned wire inside the fuse. If the fuse is
blown, replace it with a spare fuse of the same rating or lower.
LEFT SIDE
7.
Close the fuse box cover.
8.
Install the left side cover.
192
Downloaded from
www.Manualslib.com
To replace main fuse A, pull it out of its retaining clips with the fuse
remover.
To replace main fuse B, see your Honda dealer for this service.
fuse remover
main fuse A
speed limiter fuse
Taking Care of the Unexpected
manuals search engine
circuit fuse
spare fuses
main fuse B