Yamaha Security System - Yamaha WaveRunner FZR 2012 Owner's/Operator's Manual

Hide thumbs Also See for WaveRunner FZR 2012:
Table of Contents

Advertisement

Operation is subject to the following two con-
ditions: (1) this device may not cause interfer-
ence, and (2) this device must accept any
interference received, including interference
that may cause undesired operation of the de-
vice.
EJU31384

Yamaha Security System

The Yamaha Security System functions to
help prevent unauthorized use or theft of the
watercraft. The lock and unlock modes of the
security system can be selected by operating
the remote control transmitter that is included
with this watercraft. The engine cannot be
started if the lock mode of the security system
is selected. The engine can only be started if
the unlock mode is selected. (See page 25 for
information on the remote control transmitter.)
TIP:
The Yamaha Security System settings can
only be selected while the engine is stopped.
EJU37412
Yamaha Security System settings
The Yamaha Security System settings will be
confirmed by the number of beeps when the
remote control transmitter is operated, and by
the "UNLOCK" indicator light of the dual ana-
log meter unit. (See page 35 for information
on the dual analog meter unit.)
Number of
Yamaha Security
beeps
System mode
(normal operation
(Low RPM Mode)
TIP:
The beeper sounds two times for the nor-
G
mal operation mode or three times for the
"UN-
LOCK" in-
dicator
light
Lock
Goes off
Unlock
Comes
on
mode)
Unlock
Comes
on
Control function operation
Low RPM Mode. (See page 33 for Low
RPM Mode activation procedures.)
If the remote control transmitter is operated
G
while the dual analog meter unit is in the
standby state, the unit will perform the initial
operation, and then the setting is selected.
To select the lock mode:
Push the lock button on the remote control
transmitter briefly. The beeper sounds once
and the "UNLOCK" indicator light blinks once,
then goes off. This indicates the lock mode is
selected.
1
1 Lock button
2 "UNLOCK" indicator light
To select the unlock mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter briefly. The beeper
sounds two or three times and the "UNLOCK"
indicator light blinks two or three times, then
2
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2012 waverunner fzs2011 waverunner fzs

Table of Contents