Yamaha WaveRunner FZR 2012 Owner's/Operator's Manual page 39

Number of Low RPM Mode
beeps
Deactivated
TIP:
If the remote control transmitter is operated
while the dual analog meter unit is in the
standby state, the unit will perform the initial
operation, and then the setting is selected.
To activate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the "UNLOCK" indicator light blinks three
times, then comes on, the "L-MODE" indicator
light comes on and the Low RPM Mode is ac-
tivated.
TIP:
If the Low RPM Mode is activated immediate-
ly after the information display turns off, the
"L-MODE" indicator light will not come on. The
"L-MODE" indicator light will come on when
the engine is started.
1
L-Mode
1 "L-Mode" (unlock) button
2 "L-MODE" indicator light
To deactivate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
"L-
MODE"
operation indicator
light
Comes
Activated
on
Goes off
Watercraft operation
onds. Once the beeper sounds two times and
the "UNLOCK" indicator light blinks two times,
then comes on, the "L-MODE" indicator light
goes off and the Low RPM Mode is deactivat-
ed. When the Low RPM Mode is deactivated,
the watercraft returns to the normal operation
mode.
2
34