Yamaha Security System - Yamaha 2019 WaveRunner GP1800R Owner's/Operator's Manual

two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired oper-
ation.
ECJ00031
NOTICE
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the remote control transmitter.
EJU31385

Yamaha Security System

The Yamaha Security System functions to
help prevent unauthorized use or theft of the
watercraft. The lock and unlock modes of the
security system can be selected by operating
the remote control transmitter that is included
with this watercraft. The engine cannot be
started if the lock mode of the security sys-
tem is selected. The engine can only be start-
ed if the unlock mode is selected. (See page
31 for information on the remote control
transmitter.)
TIP:
The Yamaha Security System settings can
only be selected while the engine is stopped.
EJU36776
Yamaha Security System settings
The Yamaha Security System settings will be
confirmed by the number of beeps when the
remote control transmitter is operated, and
by the "UNLOCK" indicator light of the multi-
function information center. (See page 43 for
information on the multifunction information
center.)
Control function operation
Number of
beeps
TIP:
The beeper sounds two times for the nor-

mal operation mode or three times for the
Low RPM Mode. (See page 41 for Low
RPM Mode activation procedures.)
If the remote control transmitter is operated

while the multifunction information center
is in the standby state, the center will per-
form the initial operation, and then the set-
ting is selected.
To select the lock mode:
Push the lock button on the remote control
transmitter briefly. The beeper sounds once
and the "UNLOCK" indicator light blinks
once, then goes off. This indicates the lock
mode is selected.
1
1 Lock button
2 "UNLOCK" indicator light
To select the unlock mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter briefly. The beeper
sounds two or three times and the "UN-
Yamaha Security LOCK" in-
System mode
Lock
Unlock
(normal operation
mode)
Unlock
(Low RPM Mode)
"UN-
dicator
light
Goes off
Comes
on
Comes
on
2
32