Table of Contents
Advertisement
2
Scroll to one of the ringing options described below, then press Select.
Option
Ring
Ascending
Ring once
Beep once
Silent
Important:
may chose. To hear a ringing tone while editing a profile, make sure one of the
other ringing options is selected.
Set a ringing tone
A ringing tone is the melody your phone plays when you receive a call. You can set the
ringing tone to a specific sound effect, or to a melody to personalize how the phone
rings. Your phone can store 20 different tones.
1
From a profile Customize menu, scroll to Ringing tone and press Select.
2
Scroll through the options and listen. When you hear the ringing tone you want to
use, press Select.
Set ringing volume
You can set the default ringing volume for incoming voice calls and message alert
tones. There are five different levels of volume.
1
From a profile Customize menu, scroll to Ringing volume and press Select.
2
Scroll to an option and listen. When you hear the ringing volume you want to use,
press Select.
• RENAME PROFILES
You can rename any of the profiles except Normal. You may want to use your own name
for one of the profiles. When you select this profile, your name appears on the Start
screen.
1
Press Menu 3 (Profiles).
2
Scroll to the desired profile and press Select.
3
Select Customize, scroll to Profile name, and press Select.
4
Enter the new name and press OK.
Select and customize an enhancement profile
Note:
You must have an enhancement (such as a TTY/TDD) attached to your phone
prior to selecting the Enhancement settings menu.
Description
The phone rings normally.
Ringing volume begins softly, then increases in volume if the
phone is not answered.
The phone rings once to indicate an incoming call.
The phone beeps once to indicate an incoming call.
The phone makes no sound.
The Silent or Beep once ringing option disables any melody you
Personalization
41
Advertisement
Table of Contents
