Aux Mode; Select Aux Mode; Using Aux Input; Aux Menu Option - MAXTEK DB-318 User Manual

AUX Mode

Select AUX Mode

To select AUX press 'Mode' till 'AUX' shows on the display.

Using AUX Input

Connect a 3.5mm jack cable from the device like a mobile, MP3
player, tablet, etc, to the AUX port at the back of the radio.
Make sure the device connected has the volume output at maximum
in order to play the sound through the radio. Use the volume control
to regulate the end volume output.

AUX Menu Option

Press and hold the 'Info/Menu' button until you see 'System'.
Turn the dial to cycle the options and press the dial to select.
The options here are:

Standby Mode

Standby

Press the 'Standby' button to either wake or put the radio into
standby. The date and time will be displayed. You can only set the
alarms on or off in standby mode (see page 15).

On/Off

By pressing and holding the 'Standby' button for 3 seconds you
can turn the radio off or on.
10
System (See page 11).
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
O
WEBSITE:
EMAIL: enquiries@quesh.co.uk
: 01270 508538
O
: 1800 995 036
www.quesh.co.uk