Setting The Clock Manually; Alarm Mode - MAXTEK 53726 User Manual

Selecting a stored preset
• For stations stored on presets 1 to 4, press the corresponding
button to recall the saved station. The display will flash with
'P# LOAD' and then display the stations name.
• For stations stored on presets 5 to 8, press the '4+' button followed
by the corresponding 1 to 4 (1=5, 2=6, 3=7 & 4=8).

Setting the Clock Manually

• If the clock has not been automatically set via the DAB signal then
press and hold 'Info/Menu' till 'Manual' is displayed, then press the
'Info/Menu' button till 'Clock' appears. Press the 'Tune/Select'
dial to select 'Clock'.
• Turn the 'Tune/Select' dial to set the hour (24hr format) and press
the 'Tune/Select' dial to confirm and move on to the minutes.
• Once on the minutes, use the 'Tune/Select' dial as before and
press the dial to confirm the minutes.

Alarm Mode

Setting the alarm
• To set the alarm press the 'Alarm' button and 'Alarm 1' will show
on the display. Turn the 'Tune/Select' dial to select either alarm 1 or
2 and press the 'Tune/Select' dial to confirm your selection.
AFTERSALES SUPPORT
01270-508358
GB
8
1800-995-036
IRE
53726