Cameras - Nokia RM-626 Service Manual

RM-626
System Module
For the Analog TV-out, video data is passed from the host to the BCM2727B over MeSSI-16 interface and
BCM2727B sends it to the AV connector. Audio is routed separately by the host to the AV connector.

Cameras

This phone has two cameras, an 8 MPix resolution main camera and a VGA resolution secondary camera. A
dual LED flash is used for the main camera.
Primary camera (Gambino)
The primary camera is an 8 Megapixel EDOF (Enhanced Depth of Field) camera module. The module size is
8.5 mm x 8.5 mm x 6.1 mm and it fits into the 14-pin camera socket on the phone. The camera module is
SMIA profile 2 compliant and is configured by the BCM2727B using I2C control bus. Image data is transferred
to the BCM2727B for furher processing over CSI-2 (PRI_CAM_CSI).
Figure 55 Primary camera interface
Secondary camera (VGA Acme mini)
The secondary camera is a VGA fixed focus camera module. It is SMIA compliant and is configured by the
BCM2727B using I2C control bus. Image data is transferred to the BCM2727B for further processing over a CCP
based bus (SEC_CAM_CCP).
Issue 1 COMPANY CONFIDENTIAL Page 6 – 23
Copyright © 2011 Nokia. All rights reserved.