Wlan Tx Bip Testing Procedure In Testing And Tuning Tool - Nokia RM-626 Service Manual

WLAN TX BiP testing procedure in Testing and Tuning Tool

Context
Note: No external measurement equipment is required as the calibration is completely handled
internally. RF cable and adapter losses do not need to be taken into account while WLAN TX tuning
is proceeded.
WLAN TX has been BiP (Build in Prduction line testing) tuned correctly in production. There is no reason to
do re-calibration unless the Bob1.0M-b (N6300) is changed or memory (D3000) is corrupted.
WLAN TX can be tuned automatically with Testing and Tuning Tool. It performs calibrations, tunings and
measurements of WLAN TX. The results are displayed and logged in a result file, if initiated.
Steps
1. Make sure the phone is connected to the PC.
Nokia Care Suite application.
2. Start
3. To open the application, double-click the Testing And Tuning Tool icon.
Page 3 – 66 COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
RM-626
Issue 1