Nokia RM-626 Service Manual page 150

Note: The window appearance may differ depending on the
Tool versions
10 If no critical errors happen during the low band RF tuning procedure, the following window will pop up:
11 Change the CA-158RS cable to the high band RF connector on the phone PWB.
12 Click OK and RF tunings will automatically be performed for high cellular bands.
13 RF tunings will be ready when all the tunings and measurements are green in the tool window and no
errors occur.
14 If errors do happen, failed tuning/testing steps are marked with a red color and more detailed results
are shown on the screen. An example fail case is shown below:
Page 4 – 20 COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Cellular RF troubleshooting
Nokia Care Suite and Testing And Tuning
RM-626
Issue 1