8
Fitting the synchronizer
.01.06
3
Fig. 8 - 06
8
Fitting the reel stand
.01.07
Fig. 8 - 07
Installation and commissioning
4
2
1
● Screw on stop 1 with screws 2.
● Place synchronizer 3 on the shaft so that
stop 1 is in the slot of synchronizer 3, see
arrow.
● Tighten screws 4.
● Insert the synchronizer plug into the ad-
apter (see Chapter 8.02 Connecting the
plug-in connections and earth cables).
● Fit the reel stand as shown in Fig. 8 - 07.
● Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
21