Wep + Use 802.1X Authentication - Nisuta NS-WIR150N Instruction Manual

WLAN AP ROUTER 802.11N

WEP + Use 802.1x Authentication

WEP aims to provide security by encrypting data over radio
waves so that it is protected as it is transmitted from one end
point to another. However, it has been found that WEP is not as
secure as once believed.
1. From the Encryption drop-down list, select WEP setting.
2. Check the option of Use 802.1x Authentication.
3. Click on the ratio of WEP 64bits or WEP 128bits.
4. Enter the Port, IP Address and Password of RADIUS
Server:
5. Click OK button.
6. Change setting successfully! Click on Reboot Now button to
confirm take effect.
81